the number that counts is the high one (e.g. 87 Hz rather than 43 Hz).
1 50-70
2 50-90
3 50-100
4 40-150
5 Enter your own vertical sync range
Enter your choice:
========================================================================
5、选择显卡类型，输入一个描述符，能够直接回车继续；
========================================================================
You must now enter a few identification/description strings, namely an
identifier, a vendor name, and a model name. Just pressing enter will fill
in default names.
The strings are free-form, spaces are allowed.
Enter an identifier for your monitor definition:
========================================================================
5.1、是否查看显卡模块数据库选择一个合适的模块，是(输入yes)；
========================================================================
Now we must configure video card specific settings. At this point you can
choose to make a selection out of a database of video card definitions.
Because there can be variation in Ramdacs and clock generators even
between cards of the same model, it is not sensible to blindly copy
the settings (e.g. a Device section). For this reason, after you make a
selection, you will still be asked about the components of the card, with
the settings from the chosen database entry presented as a strong hint.
The database entries include information about the chipset, what driver to
run, the Ramdac and ClockChip, and comments that will be included in the
Device section. However, a lot of definitions only hint about what driver
to run (based on the chipset the card uses) and are untested.
If you can't find your card in the database, there's nothing to worry about.
You should only choose a database entry that is exactly the same model as
your card; choosing one that looks similar is just a bad idea (e.g. a
GemStone Snail 64 may be as different from a GemStone Snail 64 in terms of
hardware as can be).
Do you want to look at the card database?
========================================================================
5.2、回车到第二页，找到Vmware一项，或直接输入对应序号 "29" ；
========================================================================
18 ** NVIDIA (generic) [nv] -
19 ** NeoMagic (generic) [neomagic] -
20 ** Number Nine I128 (generic) [i128] -
21 ** Rendition (generic) [rendition] -
22 ** S3 (not ViRGE or Savage) (generic) [s3] -
23 ** S3 Savage (generic) [savage] -
24 ** S3 ViRGE (generic) [s3virge] -
25 ** SiS (generic) [sis] -
26 ** Silicon Motion (generic) [siliconmotion]-
27 ** Trident (generic) [trident] -
28 ** Tseng Labs (generic) [tseng] -
29 ** VMWare guest OS (generic) [vmware] -
30 2 the Max MAXColor S3 Trio64V -
31 2-the-Max MAXColor 6000 ET6000
32 3DLabs Oxygen GMX PERMEDIA 2
33 928Movie S3 928
34 AGX (generic) AGX-014/15/16
35 ALG-5434(E) CL-GD5434
========================================================================
5.3、确认选择的Xorg显示驱动模块"Vmware"，直接回车继续；
========================================================================
Enter a number to choose the corresponding card definition.
Press enter for the next page, q to continue configuration.
Your selected card definition:
Identifier: ** VMWare guest OS (generic) [vmware]
Chipset: -
Driver: vmware
Press enter to continue, or ctrl-c to abort.
========================================================================
5.4、再次需要输入显卡描述符(将记录在配置文档中)，输入"vmware"；
========================================================================
You must now enter a few identification/description strings, namely an
identifier, a vendor name, and a model name. Just pressing enter will fill
in default names (possibly from a card definition).
Your card definition is ** VMWare guest OS (generic) [vmware].
文章整理：西部数码--专业提供域名注册、虚拟主机服务
http://www.west263.com
以上信息与文章正文是不可分割的一部分,如果您要转载本文章,请保留以上信息，谢谢!
